Raspberry Pi Camera Module 3 launched with autofocus and HDR

Raspberry Pi Trading has launched the Camera Module 3, their first camera module supporting autofocus and HDR, designed to work with all Raspberry Pi boards that can take a camera, and offered with either a standard or wide field-of-view, and an optional infrared cut filter.

All four variants of the new camera module are equipped with a Sony IMX708 12MP sensor that supports high-dynamic range (HDR) and features phase detection autofocus. The Camera Module 3 has the same X/Y dimensions and mounting holes as the popular Camera Module 2 launched in 2016, but is several millimeters taller due to the improved optics.

Raspberry Pi Camera Module 3 specifications:

The camera modules ships with a 20cm Ribbon cable for connection with a Raspberry Pi SBC. The Camera Module 3 can be used to take full HD video and up to 12MP photos without HDR, and up to 3MP with HDR. The camera is fully supported by the Picamera2 library including the autofocus feature. Here's an HDR sample taken with the Camera Module 3 Wide by the Raspberry Pi team in the UK with a mostly dark foreground (wall/road/car) and bright background.

I’m also expecting a few Raspberry Pi Camera Modules 3 for review tomorrow so I’ll be able to test all those new features myself, but we’ll see if I get them in time as those are currently being inspected by the local customs.

The standard Raspberry Pi Camera Module 3 will sell for $25, while the wide-FoV variants will go for $35 due to its more complex and expensive optical stack. Regular readers may remember we’ve previously written about a $25 16MP Raspberry Pi autofocus camera by ArduCam which could potentially be a competitor to the new module, but it lacks HDR support. The official camera may also have a longer lifetime as Raspberry Pi Trading commits to keep the Camera Module 3 in production until at least January 2030. As a side note, the company also launched a new version of the Raspberry Pi HQ camera with an M12 mount that adds to the existing C- and CS-mount options.

More details may be found on the product page, and the new camera modules can be purchased from the usual distributors.

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

Support CNX Software! Donate via cryptocurrencies or become a Patron on Patreon

Related posts: